Replacing the battery in a servo motor’s absolute encoder can sometimes cause the zero point to shift. This happens because the encoder’s internal memory, which stores the precise position, loses power and its reference data. This article explains the technical reasons behind this phenomenon and what it means for your industrial machinery.
Practical notes for CNC router, automation and industrial motion systems.
Understanding Absolute Encoders and Battery Dependence
In industrial automation, particularly with CNC router machines and other precision equipment, servo motors are critical for accurate movement and positioning. Absolute encoders are key components that enable these motors to know their exact position, even after a power interruption. Unlike incremental encoders, absolute encoders provide a unique digital code for each shaft position, eliminating the need for a time-consuming “homing” sequence upon startup. This is achieved by storing the motor’s position data in an internal memory. For many multi-turn absolute encoders, this memory requires a small, dedicated battery to maintain its data when the main power supply is off.
The Role of the Battery and Why It Fails
The battery in an absolute encoder serves a vital purpose: to power the encoder’s internal memory (often volatile RAM like SRAM) and any associated counting mechanisms. This ensures that the precise positional data is retained even when the servo motor or the entire machine is powered down. When the battery is depleted or during the process of replacing it, this power supply is interrupted. While some encoders have a small internal capacitor to bridge this gap for a few seconds, it’s often insufficient to maintain the memory’s integrity, especially if the battery replacement is not performed quickly or correctly.
Consequently, when the main power is restored or the new battery is installed, the encoder may no longer have the correct positional reference. It essentially “forgets” its last known absolute position. This results in the “zero point shift” – the machine’s control system interprets the encoder’s current reading as a different position than it actually is. This necessitates a re-homing procedure or manual offset adjustment before the machine can operate accurately again.
Technical Aspects of Encoder Memory and Battery Types
Absolute encoders utilize various technologies, including optical and magnetic sensing, to assign a unique code to each position. Multi-turn encoders add a layer of complexity by tracking the number of full rotations. This rotation count is stored either through mechanical gearing systems or, more commonly in modern units, in electronic counters within volatile memory. The battery is essential for preserving this electronic count.
Commonly used batteries for this purpose are long-life lithium types (e.g., Li-SOCl2) due to their stability across a wide temperature range and extended lifespan, typically lasting 2 to 10 years. However, the exact duration depends on the encoder’s design, its power consumption, and operating conditions. The voltage of these batteries is usually around 3.0V or 3.6V.
The technical specifications to consider include:
- Encoder Type: Single-turn or Multi-turn Absolute Encoder.
- Memory Type: Volatile RAM (SRAM) or electronic memory supported by mechanical counters.
- Battery Type: Typically Lithium (Li-SOCl2, Li-ion), sometimes NiCd or NiMH.
- Battery Voltage: Commonly 3.0V, 3.6V (Lithium) or 2.4V (NiCd/NiMH).
- Battery Lifespan: 2-10 years, depending on usage and model.
- Data Retention (without battery): Instant loss if no backup capacitor, or a few seconds to minutes with a capacitor.
- Resolution: Often 17-23 bits for single-turn, 12-16 bits for multi-turn.
The shift in the zero point after battery replacement is a direct consequence of the encoder losing its stored positional data. This highlights the importance of understanding the encoder’s architecture and ensuring proper battery replacement procedures to maintain operational accuracy on your industrial CNC equipment.
For reliable performance of your servo motors and CNC machinery, ensure that all components, including the servo drive and linear guide rail systems, are maintained correctly. If you encounter issues with your servo motor’s absolute encoder or require assistance with system calibration, our experts are ready to help.
Need expert advice on your servo motor systems?
Related product categories: Genel · Elektronik · Mekanik

